How to Repair your Broken Window Panes at Home?

Broken windows and panes are no less than a safety hazard that needs to be treated as early as you notice them. In emergency situations, you might not even get to call a professional broken window glass repair company to help you out. It is when you have to shoulder the responsibility of repairing the broken windows and panes. Make sure that you follow all the DIY steps for repairing windows carefully so that you achieve the results you expect.

So, let’s start with the steps that will help you in repairing your broken windows and panes at home.

What do you need for Professional Broken Window Glass Repair at Home?

Before you start with the window repair, make sure that you have all the needed equipment.

·       Brad nails
·       Glaziers points
·       Hammer
·       Heavy work gloves
·       Putty knife
·       Masking tape
·       Replacement glass
·       Safety goggles
·       Window putty

Steps to Follow during DIY Window Repair

Here are the DIY steps that you should follow while repairing your windows at home.

·       Know your Requirements
Before you doing anything else, you must make sure that you know the requirements and restrictions, if there are any. Once you know your requirements, you will be able to cut glass in a suitable size. If you are not sure about your skills, you can get in touch with your glass company to guide you over the phone.

·       Remove the Broken Pieces
If the window that needs to be repaired and replaced is broken badly, make sure that you put on your gloves and goggles before removing the pieces. If the piece is cracked, you can use masking tape to cover the cracked glass in a criss-cross manner. When you break the glass, the tape will make sure that the glass pieces don’t shatter everywhere. Now, using a hammer, break the glass pieces completely. Clear the glass pieces immediately after you break them and sweep all the glass chards and splinters. When you are doing all this, make sure that your kids are not roaming around.

·       Clean the Area
You will need a putty knife to scrape the existing glazing putty, varnish, excess points, and old glazier points. You will also have to remove the surrounding wooden frame from one side of the glass pane. Start with the longer window frames than the shorter ones. Make sure that you don’t break them while removing them. At the corners, where there are extra paint and varnish, you might find it difficult.

·       Spread Putty
Take some putty in your hands and soften it as you use modeling clay. Spread a thin layer of putty on the sides of the frame and smoothen it using a putty knife. Putty acts as an adhesive so that the new glass stays in place.

·       Fix the Glass Pane
Now, it is time to put the glass pane in the opening. You will also need glazer points while fixing the glass. Use the putty knife to do the points carefully, two on all sides. It is your responsibility to make sure that they are inserted properly into the frame.

·       Reinstall Window Strips
The last step is to reinstall the window strips into place while gently tapping. You can also use the brad nails to remove the old ones carefully.

The above-mentioned steps are sure to help you out. But if you think that you won’t be able to do it on your own, it would be better if you wait for your glass company to come and do the repair or replacement. Dallas Glass Family is a popular company that offers home glass repair services Dallas at the most affordable prices. To know more about our services, you can simply visit our official website.

Comments

Popular posts from this blog

Do Foggy Glass Windows indicate You Need New Windows?

How to bring more Natural Light into your Home?

How to Do Foggy Glass Window Repair?